Ardrox 2302 Seal Heavy Duty Paint & Carbon Remover 25Lt Pail
Ardrox 2302S is a Corrosion Inhibitor supplied in a 25Lt Pail
Technical Information
- Número ONU NON HAZ
- Código del producto 27101999
- País de Origen France
Data Sheets
Descarga hoy mismo la hoja técnica (TDS) del producto Ardrox 2302 Seal Heavy Duty Paint & Carbon Remover 25Lt Pail y la hoja de datos de seguridad (SDS) del producto Ardrox 2302 Seal Heavy Duty Paint & Carbon Remover 25Lt Pail desde Silmid. Una vez que hayas iniciado sesión o te hayas registrado, la hoja de datos será visible para su descarga. Conéctese para acceder a las hojas de datosInformación del producto
Ardrox 2302 is a mixture of solvents, activators and corrosion inhibitors. It consists of two layers: an upper layer oil seal to prevent evaporation of the active paint removing solvents in the lower layer. Ardrox 2302 contains no phenolic compounds, aromatic solvents or heavy metals. Ardrox 2302 will remove a wide range of paint schemes including baked acrylics, epoxies, polyurethanes, and phenolics. It will also remove carbon or carbonaceous deposits, polymerized gum and lacquer deposits.
Application:
Ardrox 2302 is used as supplied. The total content of the container must be emptied into the tank. The recommended operating temperature range is 80 - 110°C (176 - 230°F). The product may be used for short periods at higher temperatures up to a maximum of 140°C (284°F) for removal of more obdurate finishes. In all cases, ensure, that the seal is properly maintained and all local regulations complied with, considering the 108°C (228°F) flash point of the lower layer.
- Immersion - Immerse dry components to be stripped in Ardrox 2302 in the lower layer until paint or carbon deposits have become fully softened or detached.
- Drain - drain components (over Ardrox 2302 tank) for approximately one minute.
- Immersion - Immerse components in an Ardrox primary cleaner at 10% by volume at room to reduce vapors and aid subsequent pressure rinsing.
- Pressure rinse - Pressure rinse components. The use of an Air/Water Gun or high pressure water rig is recommended.
- Dry - Dry components thoroughly using compressed air (or an air recirculation oven at 40- 80°C / 140 - 176°F).
Approvals:
- CFMI - CFM56
- GE Aviation - SPM 70-80-04
- IAE - V2500
- Pratt Whitney - SPM 70-12-00
- Rolls Royce - CSS 235 OMat 1/226
- SNECMA - DMR 70-129
Conformances:
- USAF - MIL-PRF-83936C
- Messier/Bugatti/Dowty - PCS 2700°F
- ASTM = ASTM F-519
Physical Chemical Properties:
- Appearance - pale straw-colored, diphase liquid
- Density (typical) g/ml 1.05 to 1.07 @ 20°C (68°F)
- Flash Point (upper layer) °C (°F) 190 (374) Cleveland Open Cup
- Flash Point (lower layer) °C (°F) 108 (228) Cleveland Open Cup
Shipping information
Entrega internacional (entrega puerta a puerta) está disponible para países seleccionados en todo el mundo. Envío se calculan automáticamente basado en el peso, la ubicación y la naturaleza peligrosa de las mercancías. Los clientes también pueden elegir fábrica para arreglar su propia colección.