Chemetall Termoin C Test Piece
Reference Test Block C is made of two rectified low carbon steel pieces fitted together with an air gap (0.015-mm). On each side of these bars, there are two magnets which are assembled top to bottom so that each bar may have a North and a South pole to its ends.
Technical Information
- Code des marchandises 90249000
- Pays d'origine France

Data Sheets
Téléchargez dès aujourd'hui la fiche technique (TDS) du produit Chemetall Termoin C Test Piece ainsi que la fiche de données de sécurité (SDS) du produit Chemetall Termoin C Test Piece depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable. Veuillez vous connecter afin d’avoir accès aux fiches techniquesInformations produits
The length of the indication spectrum, which can be read on the right side and the left side, indicates the quality of the magnetic ink which is used.
Reference Test Block C is intended to be used systematically:
- To check the performance of crack detection of magnetic inks and powders as part of the Quality Control at the manufacturing stage (Section 7.1.1 of EN ISO 9934-2) and in use (Section 7.1.2 of EN ISO 9934-2)
- To compare the efficiency of magnetic inks and powders against reference samples.
- To compare the performance of magnetic powders and inks of various types from the same source or from 1 of 3 different sources
Shipping information
Veuillez vous reporter à notre page de livraison pour plusd’informations.