Loctite Stycast HD 3475 Hardener 1USQ Can
Hardener HD3475 is the hardener component known to be used with RE2038 and RE2039 resins. **Please Note this is the hardener component Only.
Technical Information
- Code UN 2079 CL8
- Code des marchandises 35069190
- Pays d'origine United States
Data Sheets
Téléchargez dès aujourd'hui la fiche technique (TDS) du produit Loctite Stycast HD 3475 Hardener 1USQ Can ainsi que la fiche de données de sécurité (SDS) du produit Loctite Stycast HD 3475 Hardener 1USQ Can depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable. Veuillez vous connecter afin d’avoir accès aux fiches techniquesInformations produits
These systems have proven themselves with a 20-year service record on solenoid coils, transformers, resistors, connectors and hundreds of other applications.
Diluted Epoxy Resins:
HYSOL resin RE2038 with hardener HD3475 is a low viscosity, general casting system with excellent electrical and physical properties. It can be used whenever a rigid compound is needed and very low mixed viscosity is critical. HYSOL casting compound EE4143 with hardener HD3475 is silica filled for improved thermal properties, lower shrinkage and lower expansion characteristics.
Undiluted Epoxy Resin systems:
HYSOL resin RE2039 with hardener HD3475 is an undiluted epoxy 100% solids system and should be used where very low mixed viscosity is not a critical requirement. The undiluted resin exhibits a higher heat distortion, lower moisture absorption, lower shrinkage and lower expansion characteristics than obtainable with a diluted resin.
HYSOL casting compound EE4183 with hardener HD3475 is silica filled for improved thermal properties, lower shrinkage and lower expansion characteristics. They are resistant to gasoline, jet fuel and other solvents.
Shipping information
Veuillez vous reporter à notre page de livraison pour plusd’informations.