Dynea Prefere 4050M Adhesive 1Kg
Prefere 4050 is supplied in three grades: F (Fast), M (medium) and S (Slow); hardener Prefere 5750 is used with each grade. Prefere 4050 liquid resins mixed with hardener Prefere 5750, a resinous liquid containing filler
Technical Information
- Code UN 1866 CL3
- Code des marchandises 35069190
- Pays d'origine United Kingdom
Data Sheets
Téléchargez dès aujourd'hui la fiche technique (TDS) du produit Dynea Prefere 4050M Adhesive 1Kg ainsi que la fiche de données de sécurité (SDS) du produit Dynea Prefere 4050M Adhesive 1Kg depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable. Veuillez vous connecter afin d’avoir accès aux fiches techniquesInformations produits
Prefere 4050 adhesives are also suitable for use in the production of heat resistant composite structures, e.g. fire-resisting doors. They are resistant to acids, weak alkalis, solvents and boiling water. Prefere 4050 resins with hardener Prefere 5750 meet the requirements of EN 301-Type1 and BS 1203 (Type WBP).
Prefere 4050 has been tested according to the German Standard DIN 68 141 by the MPA, Otto-Graf-Institut in Germany and found to suited for gluing load-bearing wooden structures for indoor and exterior use in accordance with DIN 1052.
Prefere 4050 adhesives are simple to prepare. Both resin and hardener are liquids, and are mixed in a 1:1 ratio. The three adhesives are highly suitable for bonding a wide range of materials to porous substrates. These materials include:
- Wood, improved or densified woods, mineral fibre reinforced boards,
- brick, concrete, and unglazed porcelain.
- Rigid expanded plastics, e.g. expanded polystyrene, polyurethane and PVC
- Industrial and decorative laminated plastics (phenolic resin based or phenolic resin backed).
- Leather, cork, linoleum and nylon.
Shipping information
Veuillez vous reporter à notre page de livraison pour plusd’informations.