3M 847 Nitrile High Performance Rubber & Gasket Adhesive
3M 847 adhesive is a high strength, fast setting nitrile based adhesive, suitable for bonding nitrile to a wide range of surfaces.
Data Sheets
Téléchargez dès aujourd'hui la fiche technique (TDS) du produit 3M 847 Nitrile High Performance Rubber & Gasket Adhesive 5Lt Can ainsi que la fiche de données de sécurité (SDS) du produit 3M 847 Nitrile High Performance Rubber & Gasket Adhesive 5Lt Can depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable. Veuillez vous connecter afin d’avoir accès aux fiches techniquesInformations produits
3MNitrile High Performance Rubber Gasket Adhesives 847 and 847H provide strong flexible bondsRubber gasket adhesive 847 is a medium viscosity grade adhesive for many brush or flow applicationsRubber gasket adhesive 847 meets the requirements of Mil-C-4003Rubber gasket adhesive 847H is a high viscosity grade adhesive for many brush or flow applications requiring gap filling or reduced soak-in
Quick dryingExcellent resistance to many fuels and oilsBond leather, nitrile rubber, most plastics, and gasketing materials to a variety of substratesMay be heat cured to obtain improved physical propertiesTemperature of the adhesive and surfaces to be bonded should be at least 65F (18C)
Applications:
- Porous Surfaces: Brush, flow or spray a thin, even coat of adhesive to one or both surfaces.
- Coating both surfaces is preferred since it gives greater strength and permits longer open time before bonding.
- Very absorbent materials may require more than one coat.
- Bond while adhesive is still wet or aggressively tacky. Join surfaces with firm pressure.
- Non-Porous Surfaces:Brush, flow or spray a thin, even coat of adhesive to both surfaces.
- Allow adhesive to dry until tacky. Join surfaces with firm pressure.
Shipping information
Veuillez vous reporter à notre page de livraison pour plusd’informations.