Johnson Matthey A501H 50gm (Freezer Storage -18°C)
Johnson Matthey A501 is a two part conductive adhesive.
Technical Information
- Code UN 3082 CL9
- Code des marchandises 35069190
- Pays d'origine United Kingdom
Data Sheets
Téléchargez dès aujourd'hui la fiche technique (TDS) du produit Johnson Matthey A501H 50gm (Freezer Storage -18°C) ainsi que la fiche de données de sécurité (SDS) du produit Johnson Matthey A501H 50gm (Freezer Storage -18°C) depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable. Veuillez vous connecter afin d’avoir accès aux fiches techniquesInformations produits
A501 will bond extremely well to most surfaces. Conductivity and adhesion performance is very good. The unmixed components have an excellent shelf life.
Typical Properties:
- Typical Cured Properties
- Volume Resistivity < 1000 µΩ.cm
- Shear Adhesion Strength 2.2 kN (single-lap, 0.5 in2)
- Maximum Service Temperature 100°C (continuous), 150°C (excursions)
Typical Physical Properties
- Silver Content (resin) 70.0 wt%
- Silver Content (hardener) 70.0 wt%
- Shelf Life (resin) 6 months at 15 - 25°C
- Shelf Life (hardener) 6 months at -18°C
Mixing & Application:
The adhesive is a 100% solids system, supplied in two parts. The two components should be weighed out in equal amounts onto a flat non-porous substrate, and mixed thoroughly with a flat blade for 4 minutes before use. All surfaces should be clean, dry and grease-free. Apply A501 to surfaces to be bonded, by spatula, palette knife or stylus pin.
Shipping information
Veuillez vous reporter à notre page de livraison pour plusd’informations.