Innotec Quick Bond Ethyl Cyanoacrylate Adhesive 10gm Tube (Fridge Storage)
Quick Bond and Quick Bond Activator are unique products especially designed for the quick repair and gluing of metals and almost every type of modern synthetic.Quick Bond is a special gel which stays in place because it does not run.
Technical Information
- Code UN 3334 CL9
- Code des marchandises 35069190
- Pays d'origine United Kingdom
Data Sheets
Téléchargez dès aujourd'hui la fiche technique (TDS) du produit Innotec Quick Bond Ethyl Cyanoacrylate Adhesive 10gm Tube (Fridge Storage) ainsi que la fiche de données de sécurité (SDS) du produit Innotec Quick Bond Ethyl Cyanoacrylate Adhesive 10gm Tube (Fridge Storage) depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable. Veuillez vous connecter afin d’avoir accès aux fiches techniquesInformations produits
The surface must be clean, dry and free of grease. Roughen up or sand the surface. Clean metalsurfaces with Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and pre-treat them with Innotec Repaplast Primer New Formula.
Application method:
When gluing: Give one part a thin layer of Quick Bond, spray the other part with a thin layer of Quick Bond Activator, and join the parts together. Allow a few minutes for Quick Bond to dry.
When repairing: Apply Quick Bond straight from the tube to the repair area. Smooth with a filling knife or spatula. Wait 30 seconds and apply a thin layer of Quick Bond Activator over the element repaired with Quick Bond. It will take only a few seconds to harden.
Shipping information
Veuillez vous reporter à notre page de livraison pour plusd’informations.