Please note - Silmid.com will be offline for 10 minutes between 9:15AM and 10:00AM while we deploy updates, we apologise for any inconvenience this may cause.
Markem-Imaje 7904 White Ink 4.125oz Kit
The 7904 ink series is a two part semi-paste epoxy ink for application by direct or offset printing with plate or reservoir equipment onto substrates including glass, metals, and plastics.
Technical Information
- Code UN 2259 CL8
- Code des marchandises 32151900
- Pays d'origine United States
Data Sheets
Téléchargez dès aujourd'hui la fiche technique (TDS) du produit Markem-Imaje 7904 White Ink 4.125oz Kit ainsi que la fiche de données de sécurité (SDS) du produit Markem-Imaje 7904 White Ink 4.125oz Kit depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable. Veuillez vous connecter afin d’avoir accès aux fiches techniquesInformations produits
Markem 7904 White Ink 4.125oz Kit:
This two part ink is sold in pre-measured units consisting of an A package and a B package. When the total amount of the A package is combined with the total amount of the B package (with both packages carrying the same series and color description) the required mixing ratio is maintained. Smaller quantities can be mixed using the weight ratio marked on the containers. Allow 20 to 30 minutes after mixing before use.
Cured prints of inks in this series have shown good resistance to the following conditions after application in accordance with MARKEM's recommended procedures:
- solvents, including methanol, ethanol, and those specified in MIL-STD-883 Method 2015 and MIL-STD-202 Method 215 (revision current at the time of testing).
- soaking in water and gasoline as described in Federal Specification TT-I-1795A.
- salt spray (20% solution) for 48 hours.
- 118°C For 24 hours.
- abrasion (film thickness dependent).
Shipping information
Veuillez vous reporter à notre page de livraison pour plusd’informations.