Stag A Red Jointing Paste 400gm Can
Stag A is of thin consistency for use on small joints which are new and undamaged. If used on screw threaded joints, it is recommended that it is only used on those fittings with a diameter of 12 – 13mm (½ inch B.S.P).
Technical Information
- Code UN 1993 CL3
- Code des marchandises 32141010
- Pays d'origine United Kingdom
Data Sheets
Téléchargez dès aujourd'hui la fiche technique (TDS) du produit Stag A Jointing Compound ainsi que la fiche de données de sécurité (SDS) du produit Stag A Jointing Compound depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable. Veuillez vous connecter afin d’avoir accès aux fiches techniquesInformations produits
Jointings are ideal for use on all types of flanged or screw threaded joints and have been formulated to meet the most exacting requirements of the Automotive, Marine, Electrical, Plumbing and General Engineering Industries. Both grades are suitable for use on pipework carrying water, brine, steam, gas, fuel oil, diesel oil, petrol, Ammonia or compressed air.
Application:
Stag Brand Jointing Pastes are applied by brush to previously cleaned surfaces, free from rust, dirt, oil, grease, cutting fluid and corrosion inhibitors etc. We recommend the use of solvent based cleaners on the cut threads and not citric-based cleaners. This ensures all contaminates are removed. In normal circumstances they may be used with or without packing in accordance with normal pipe fitting practice. However, being thermoplastic, these jointings should be reinforced with hemp or wick when the joint is liable to extremes of temperature and pressure.
Specifications:
Meets British Standard 6956 : Part 5 : 1992
Shipping information
Veuillez vous reporter à notre page de livraison pour plusd’informations.