Please note - Silmid.com will be offline for 10 minutes between 9:15AM and 10:00AM while we deploy updates, we apologise for any inconvenience this may cause.
Stag Kwikfill Polyester Resin 454gm Kit
Kwikfill is a general-purpose, polyester resin filler suitable for a wide variety of applications, including motor vehicle body repair, concrete pipe joint, mould repair and pattern making.
Technical Information
- Code UN 3269 CL3 / 3108 CL5.2
- Code des marchandises 32141010
- Pays d'origine United Kingdom
Data Sheets
Téléchargez dès aujourd'hui la fiche technique (TDS) du produit Stag Kwikfill Polyester Resin 454gm Kit ainsi que la fiche de données de sécurité (SDS) du produit Stag Kwikfill Polyester Resin 454gm Kit depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable. Veuillez vous connecter afin d’avoir accès aux fiches techniquesInformations produits
Kwikfill is supplied in two parts, and to assist in the mixing process, they are different colours. The resin component is blue and the hardener component is yellow. The two pastes are blended until an even green colour develops. This ensures that no unmixed material remains to reduce strength or adhesion.
The freshly mixed material has the consistency of a soft paste and can readily be applied and spread by palette knife. When cured, it adheres well to most clean, abraded metals and to dry, porous surfaces such as wood, concrete and unglazed ceramics.
Application:
Kwikfill is easily shaped by hand or mechanical methods using either wet or dry sanding techniques and can be finished to a fine feather edge without breaking or lifting. The finished surface will accept all normal paints, and is not damaged by the temperatures used in the cure of low-bake™ stoving systems.
Shipping information
Veuillez vous reporter à notre page de livraison pour plusd’informations.