Bostik Born2Bond Light Lock HV Instant Adhesive

They are designed for bonding applications that require fast fixturing, coating or surface cure. The UV- and visible-light cure sensitivity allows rapid bonding through transparent parts and quick curing of light-exposed bulk or surface-coated areas, while the instant bonding capability ensures cure between opaque substrates (contact cure).

Features:

• Dual cure formulation: instant and photo-cure
• Fixture time in 60 s (without light exposure)*
• Can be cured with visible and UV-LED light <5 sec Long open time without activation
• Dry to touch, tack free surface cure
• Cure-on-demand of excess material released from bondlines
• Bonds, fills, reconstructs and coats
• Low odor, low blooming

Directions For Use:

• Before applying Born2Bond Light Lock HV, make sure the surface is clean, dry and grease-free.
• Apply adhesive to one surface. Do not use items like tissues or a brush to spread the adhesive.
• Assemble the parts within a few seconds. The parts should be accurately positioned, as the short fixture time leaves little opportunity for adjustment.
• Bonds should be fixed or clamped until the adhesive has reached fixture.
• The product should be allowed to develop to full strength before subjecting it to any service loads (typically 24 to 72 hours after assembly, depending on bond gap, materials and ambient conditions).

Applications:

Typical applications for this product are conformal coating, encapsulation, needle bonding, perfume and liquor bottle metal bonding, electronics assembly, Plastic to metal bonding for hearing aids, and glass to metal bonding for jewelry and watches.

Product Characteristics:

• Base Technology Methoxyethyl Cyanoacrylate
• Components 1k - 2k 1k
• Appearance/Color Transparent/yellowish*
• Temperature Use Range -40°C to 80°C (-40°F to 176F)
• VOC Content (ISO 11890-2) 27 g/L