Innotec Quick Bond Ethyl Cyanoacrylate Adhesive 10gm Tube (Fridge Storage)
Quick Bond and Quick Bond Activator are unique products especially designed for the quick repair and gluing of metals and almost every type of modern synthetic.Quick Bond is a special gel which stays in place because it does not run.
Technical Information
- UN Number 3334 CL9
- Commodity Code 35069190
- Country of Origin United Kingdom
Data Sheets
Download the Innotec Quick Bond Ethyl Cyanoacrylate Adhesive 10gm Tube (Fridge Storage) technical data sheet (TDS) and the Innotec Quick Bond Ethyl Cyanoacrylate Adhesive 10gm Tube (Fridge Storage) safety data sheet (SDS) from Silmid today. Once you have logged in or signed up, the datasheet will be visible for download if one is available. Please login to access DatasheetsProduct Information
The surface must be clean, dry and free of grease. Roughen up or sand the surface. Clean metalsurfaces with Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and pre-treat them with Innotec Repaplast Primer New Formula.
Application method:
When gluing: Give one part a thin layer of Quick Bond, spray the other part with a thin layer of Quick Bond Activator, and join the parts together. Allow a few minutes for Quick Bond to dry.
When repairing: Apply Quick Bond straight from the tube to the repair area. Smooth with a filling knife or spatula. Wait 30 seconds and apply a thin layer of Quick Bond Activator over the element repaired with Quick Bond. It will take only a few seconds to harden.
Shipping information
International delivery (door to door delivery) is available for selected countries worldwide. Shipping will be automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection.
Please refer to our delivery page for more information.