Bostik Born2Bond Primer Instant Adhesive Surface Preparation 30ml Bottle

The product also can serve as an addition to surface treatment (corona plasma, laser etching, etc.). It is only recommended for difficult-to-bond substrates, which include polyethylene, polypropylene, polytetrafluoroethelene (PTFE) and thermoplastic rubber materials and is not recommended when high peel strength is required.

Features:

• Very low viscosity
• Very good wettability on low surface energy substrates
• Works as an accelerator on cyanoacrylate adhesive applications
• Enables adhesive to be applied within two hours without losing performance

Directions For Use:

• Before applying Born2Bond Primer, ensure the surface is clean, dry and grease-free.
• Born2Bond Primer can be applied at room temperature via brushing.
• Avoid excess Born2Bond Primer on the surface.
• After applying Born2Bond Primer, ensure the solvent evaporates completely and that the surface is dry before applying a Born2Bond adhesive to one of the surfaces.
• If using a polyolefin adhesive to bond the surfaces together, be sure to apply the primer on the polyolefin. The part can then be assembled in seconds.
• Once assembled, ensure the substrates are clamped together until the adhesive has achieved fixture.

Applications:

Typical applications for this product are low surface energy bonding and indoor applications.

Product Characteristics:

• Technology Primer Cyanoacrylate
• Appearance Transparent liquid
• Solvent n-Heptane
• Viscosity at 2°C (68°F)* 1.25 cp