Silpak PMX 200/100cs Silicone Fluid

PMX-200 Silicone Fluid is highly soluble in organic solvents such as aliphatic and aromatic hydrocarbons, and the halocarbon propellants used in aerosols. The fluid is easily emulsified in water with standard emulsifiers and normal emulsification techniques. PMX-200 Silicone Fluid is insoluble in water and many organic products.

Additive quantities as small as 0.1% may suffice where PMX-200 Silicone Fluid is to be used as a surface agent or for de-soaping creams and lotions. However, 1–10% is needed for applications such as hand creams and lotions to form a more uniform film and effective barrier.

Features:

• Ease of application and rubout
• Ease of buffing
• Enhances colour
• High water repellency
• High compressibility
• High shearability without breakdown
• High spreadability and compatibility
• Low environmental hazard
• Low fire hazard
• Low reactivity and vapor pressure
• Low surface energy
• Good heat stability
• High dielectric strength
• High damping action
• Oxidation-, chemical- and weather-resistant

Applications:

• Active ingredient in a variety of automotive, furniture, metal and specialty polishes in paste, emulsion and solvent-based polishes and aerosols
• Various applications including cosmetic ingredient, elastomer and plastics lubricant, electrical insulating fluid, foam preventive or breaker, mechanical fluid, mold release agent, surface active agent, and solvent based finishing and fat liquoring of leather

Please Note: The viscosities generally used in formulating polishes are between 100 and 30,000 cs (centi-stoke). To obtain optimum results, in terms of ease of application and depth of gloss, it is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts PMX-200 Silicone Fluid 100 cs and 1 part PMX-200 Silicone Fluid 12,500 cs). The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.